Tanks
The agreed visible scope may cover internal surfaces and accessible connections. Images and video are referenced to the tank and inspected area; inaccessible or obscured surfaces are recorded as limitations.
Services / Confined-space inspection
Confined-space inspection
ASIO X documents tanks, silos, boilers, sewers and shafts while personnel remain outside the hazard area.
ASIO XPLATFORM
40K LMLIGHT
NO-ENTRYMETHOD
Equipment availability
DJI Matrice 4T is in our equipment inventory. Inspection scope and timing are agreed after reviewing project conditions.
DJI Matrice 4E and Flybotix ASIO X are purchased against a confirmed order. Scope and timing are agreed after confirming equipment availability and reviewing project conditions.
CleanSky Engineering
Confined-space inspection
Applications
Scope follows the engineering decision.
- 01Tanks and silos
- 02Boilers and ducts
- 03Sewers and manholes
- 04Shafts and tunnels
PROJECT QUALIFICATION
Conditions and operating boundaries
Feasibility depends on geometry, atmosphere, process condition, access, link quality and emergency procedures. ASIO X works without GNSS but is not suitable for every environment. Remote visual inspection reduces personnel entry; it does not replace contact NDT or specialist assessment.
Client deliverables
Structured data for maintenance teams.
✓ Inspection video
✓ Finding imagery
✓ 3D model/map where suitable
✓ Location register
CleanSky Engineering
Different assets require different inspection references
Silos
Geometry, remaining material and internal structures determine accessible views. Findings are referenced to the silo and visible area, with obscured zones distinguished from inspected surfaces.
Boilers
The process condition, access and internal geometry must be assessed before an internal flight. Images are organised by accessible section; visual evidence does not establish wall thickness or replace contact NDT.
Pipelines and ducts
External inspection of piping and insulation differs from an internal flight. Internal inspection is assessed only where dimensions, bends, atmosphere, access and communication permit it. Where feasible, observations need an agreed section and position reference.
Sewers and shafts
Flow, atmosphere, geometry, visibility and communication affect feasibility. Video and findings are referenced to the accessible section or shaft. A map or 3D model is provided only where suitable and agreed.
How we work
From an engineering question to a maintenance decision.
01
Technical assessment
Objective, asset, constraints and required outcome.
02
Plan and safety
Method, RAMS/SORA, permissions and readiness.
03
Data capture
Controlled mission and ongoing quality checks.
04
Technical report
Findings, imagery, location and priorities.
POLAND · GERMANY